-
![6N137-500E]()
6N137-500E
ne of the standout features of the 6N137-500E is its remarkable Common Mode Rejection (CMR) capability. With a minimum CMR of 15 kV/μs at VCM=1 kV, this optocoupler is designed to excel in...
-
![4N25-500E]()
4N25-500E
The 4N25 optocoupler is typically housed in a 6-pin Dual In-line Package (DIP). The DIP package allows for straightforward through-hole mounting on printed circuit boards (PCBs) and facilitates...
-
![4N35-500E]()
4N35-500E
The 4N35-500E photocoupler offers a smart and efficient solution for secure data transmission and isolation in electronic circuits. With optimal isolation and excellent signal integrity, it...
-
![6N135-500E]()
6N135-500E
The 6N135-500E is designed for high-speed TTL/TTL applications. A standard 16-mA TTL sink through the input LED will provide enough output current for a TTL load and 5.6 kΩ pull-up resistor. These...
-
![6N136-500E]()
6N136-500E
The 6N135-500E is for TTL/CMOS, TTL/LSTTL or wideband analog applications. These devices have a minimum current transfer ratio (CTR) of 7% at IF = 16 mA.
-
![ACPL-214-500E]()
ACPL-214-500E
The input-output isolation voltage is rated at 3750 VRMS. Response time, tr, is 2 μs typically, while minimum CTR is 20 percent at input current of 1 mA.
-
![ACPL-217-500E]()
ACPL-217-500E
The ACPL-217-500E is a DC input, single channel, half-pitch phototransistor optocoupler consisting of a light emitting diode optically coupled to the phototransistor. The input and output...
-
![6N138-500E]()
6N138-500E
The 6N138, HCPL-0700, and HCNW138 are designed for use mainly in TTL applications. Current Transfer Ratio (CTR) is 300% minimum over 0 to 70°C for an LED current of 1.6 mA (1 TTL Unit load ). A...
-
![6N139-500E]()
6N139-500E
The 6N139, HCPL-0701, and HCNW139 are for use in CMOS, LSTTL or other low power applications. A 400% minimum current transfer ratio is guaranteed over 0 to 70°C operating range for only 0.5 mA of...
