
ACPL-W61L-500E
Description
Technical Parameters
The ACPL-W61L-500E optocoupler logic gate stands out with its low power consumption, high-speed operation, and robust safety features. With a maximum IDD current of 1.3 mA per channel and low input current of 1.6 mA, it ensures energy efficiency and seamless integration into low-power systems. The device's slew-rate controlled outputs enhance signal integrity, and its minimum Common-Mode Rejection of 20 kV/μs at VCM = 1000V ensures reliable performance in varying voltage environments. Operating at a minimum speed of 10 MBd and guaranteeing AC and DC performance over a wide temperature range (-40°C to +105°C), it is suitable for diverse applications. Housed in a compact stretched SO-6 package and with safety certifications including UL 1577, CSA, and IEC/EN/DIN EN 60747-5-5, the ACPL-W61L-500E is a reliable and environmentally conscious solution, being RoHS-compliant.

Related Products:
|
Mfr Part |
ACPL-W61L-000E |
ACPL-W61L-060E |
ACPL-W61L-060E |
ACPL-W61L-560E |
|
Description |
OPTOISO 5KV PUSH PULL 6SO |
OPTOISO 5KV PUSH PULL 6SO |
OPTOISO 5KV PUSH PULL 6SO |
OPTOISO 5KV PUSH PULL 6SO |
|
Stock |
40000 |
40000 |
40000 |
40000 |
|
Product Status |
Active |
Active |
Active |
Active |
|
Number of Channels |
1 |
1 |
1 |
1 |
|
Voltage-Isolation |
5000Vrms |
5000Vrms |
5000Vrms |
5000Vrms |
|
Common Mode Transient Immunity (Min) |
20kV/μs |
20kV/μs |
20kV/μs |
20kV/μs |
|
Input Type |
DC |
DC |
DC |
DC |
|
Output Type |
Totem Pole |
Totem Pole |
Totem Pole |
Totem Pole |
|
Current - Output / Channel |
10 mA |
10 mA |
10 mA |
10 mA |
|
Data Rate |
10MBd |
10MBd |
10MBd |
10MBd |
|
Propagation Delay tpLH / tpHL (Max) |
80ns, 80ns |
80ns, 80ns |
80ns, 80ns |
80ns, 80ns |
|
Voltage - Forward (Vf) (Typ) |
1.3V |
1.3V |
1.3V |
1.3V |
|
Current - DC Forward (If) (Max) |
8mA |
8mA |
8mA |
8mA |
|
-Voltage - Supply |
2.7V ~ 5.5V |
2.7V ~ 5.5V |
2.7V ~ 5.5V |
2.7V ~ 5.5V |
|
Operating Temperature |
-40°C ~ 100°C |
-40°C ~ 100°C |
-40°C ~ 100°C |
-40°C ~ 100°C |
|
Package / Case |
SDIP6(6.8x1.27) |
SDIP6(6.8x1.27) |
SDIP6(6.8x1.27) |
SDIP6(6.8x1.27) |
|
Package |
Tape & Reel (TR) |
Tape & Reel (TR) |
Tape & Reel (TR) |
Tape & Reel (TR) |
Applications:
•Communication interfaces: RS485, CANBus, and I2C
•Microprocessor system interfaces
•Digital isolation for A/D and D/A converters
Description:
The Broadcom® low-power ACPL-x6xL digital optocouplers combine an AlGaAs light emitting diode (LED) and an integrated high gain photodetector. The optocoupler consumes low power, at maximum 1.3 mA IDD current per channel across temperature. With a forward LED current as low as 1.6 mA, most microprocessors can directly drive the LED.
An internal Faraday shield provides a guaranteed commonmode transient immunity specification of 20 kV/µs. Maximum AC and DC circuit isolation is achieved while maintaining TTL/CMOS compatibility.
The optocouplers' CMOS outputs are slew-rate controlled and designed to allow the rise and fall time to be controlled over a wide load-capacitance range. The ACPL-x6xL series operates from both 3.3V and 5V supply voltages with guaranteed AC and DC performance from –40°C to +105°C.
These low-power optocouplers are suitable for high-speed logic interface applications.
CAUTION!
It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. The components featured in this data sheet are not to be used in military or aerospace applications or environments.
Hot Tags: acpl-w61l-500e, China acpl-w61l-500e manufacturers, suppliers, ACPL-021L-500E, Photo Coupler Logic Gate, ACNT-H61L-500E, 6N137-500E, ACNT-H61LC-500E, ACNW261L-500E
Previous
ACPL-W70L-500ENext
ACPL-W611-500ESend Inquiry
You Might Also Like







