
ACPL-M62L-500E
Description
Technical Parameters
The ACPL-M62L-500E optocoupler stands out as a high-performance solution, offering ultra-low current consumption (1.5 mA max) and low input current capability (2 mA). Its open-drain output and compact SO-5 package enhance versatility and space efficiency. With a minimum CMR of 20 kV/μs at VCM = 1000 V, it ensures robust common mode rejection, providing noise immunity in high-voltage environments. Operating at a high speed of 10 MBd minimum, it meets the demands of rapid data transfer. The device guarantees AC and DC performance over a wide temperature range (-40 °C to +105 °C) and is pending safety approvals, including UL 1577 recognition, CSA approval, and compliance with IEC/EN/DIN EN 60747-5-5 for Reinforced Insulation. Overall, the ACPL-M62L-500E is a reliable and efficient optocoupler designed to meet diverse application requirements.

Related Products:
|
Mfr Part |
ACPL-M62L-000E |
ACPL-M62L-060E |
ACPL-M62L-500E |
ACPL-M62L-560E |
|
Description |
OPTOISO 3.75KV OPEN DRAIN 5SO |
OPTOISO 3.75KV OPEN DRAIN 5SO |
OPTOISO 3.75KV OPEN DRAIN 5SO |
OPTOISO 3.75KV OPEN DRAIN 5SO |
|
Stock |
40000 |
40000 |
40000 |
40000 |
|
Product Status |
Active |
Active |
Active |
Active |
|
Number of Channels |
1 |
1 |
1 |
1 |
|
Voltage-Isolation |
3750Vrms |
3750Vrms |
3750Vrms |
3750Vrms |
|
Common Mode Transient Immunity (Min) |
20kV/μs |
20kV/μs |
20kV/μs |
20kV/μs |
|
Input Type |
DC |
DC |
DC |
DC |
|
Output Type |
Totem Pole |
Totem Pole |
Totem Pole |
Totem Pole |
|
Current - Output / Channel |
10 mA |
10 mA |
10 mA |
10 mA |
|
Data Rate |
10MBd |
10MBd |
10MBd |
10MBd |
|
Propagation Delay tpLH / tpHL (Max) |
80ns, 80ns |
80ns, 80ns |
80ns, 80ns |
80ns, 80ns |
|
Voltage - Forward (Vf) (Typ) |
1.3V |
1.3V |
1.3V |
1.3V |
|
Current - DC Forward (If) (Max) |
8mA |
8mA |
8mA |
8mA |
|
-Voltage - Supply |
2.7V ~ 5.5V |
2.7V ~ 5.5V |
2.7V ~ 5.5V |
2.7V ~ 5.5V |
|
Operating Temperature |
-40°C ~ 105°C |
-40°C ~ 105°C |
-40°C ~ 105°C |
-40°C ~ 105°C |
|
Package / Case |
SOP5(4.4x1.27) |
SOP5(4.4x1.27) |
SOP5(4.4x1.27) |
SOP5(4.4x1.27) |
|
Package |
Tape & Reel (TR) |
Tape & Reel (TR) |
Tape & Reel (TR) |
Tape & Reel (TR) |
Applications:
• Communication interface: I2C-bus, CAN Bus
• Microprocessor system interfaces
• Digital isolation for A/D, D/A conversion
Description:
The ACPL-M62L is an optically-coupled optocoupler that combines an AlGaAs light-emitting diode and an integrated high-gain photo detector addresses the low power need. The optocoupler consumes low power at maximum 1.5 mA IDD across temperature. The forward current is as low as 2 mA, and so allows direct current drive by most microprocessors. ACPL-M62L support both 3.3 V and 5 V supply voltage with guaranteed AC and DC operational parameters from -40 °C to +105 °C. The output of the detector IC is an open-drain type. The internal Faraday shield provides a guaranteed common mode transient immunity specification of 20 kV/μs. This unique design provides maximum AC and DC circuit isolation while achieving TTL/CMOS compatibility. These optocouplers are suitable for high speed logic interfacing, while consuming extremely low power.
CAUTION:
It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation, which may be induced by ESD.
Hot Tags: acpl-m62l-500e, China acpl-m62l-500e manufacturers, suppliers, ACNT-H61L-500E, 6N137-500E, Photo Coupler Logic Gate, ACNT-H61LC-500E, ACPL-021L-500E, ACNW261L-500E
Previous
HCPL-0630-500ENext
ACPL-M61U-500ESend Inquiry
You Might Also Like







