ACPL-064L-500E

The ACPL-064L-500E optocoupler is a high-performance component with several key features. Notably, it boasts low power consumption with a maximum IDD current of 1.3 mA per channel and a low input current of 1.6 mA. The built-in slew-rate controlled outputs ensure precise signal transitions, while its high-speed data transmission capability at a minimum of 10 MBd makes it suitable for rapid communication applications. With a minimum Common-Mode Rejection (CMR) of 20 kV/μs and guaranteed AC and DC performance over a wide temperature range (-40°C to +105°C), it ensures signal integrity in diverse operating conditions. The optocoupler offers flexibility with various package options and holds stringent safety approvals, including UL 1577 recognition and compliance with IEC/EN/DIN EN 60747-5-5 standards for Reinforced Insulation. Additionally, being RoHS-compliant underscores its commitment to environmental standards. In summary, the ACPL-064L-500E is a versatile and reliable choice for electronic applications, combining low power consumption, high-speed data transmission, and robust safety features.

·Communication interfaces: RS485, CANBus, and I2C 

·Microprocessor system interfaces 

·Digital isolation for A/D and D/A converters

The Broadcom® low-power ACPL-x6xL digital optocouplers combine an AlGaAs light emitting diode (LED) and an integrated high gain photodetector. The optocoupler consumes low power, at maximum 1.3 mA IDD current per channel across temperature. With a forward LED current as low as 1.6 mA, most microprocessors can directly drive the LED.

An internal Faraday shield provides a guaranteed commonmode transient immunity specification of 20 kV/µs. Maximum AC and DC circuit isolation is achieved while maintaining TTL/CMOS compatibility.

The optocouplers' CMOS outputs are slew-rate controlled and designed to allow the rise and fall time to be controlled over a wide load-capacitance range.

The ACPL-x6xL series operates from both 3.3V and 5V supply voltages with guaranteed AC and DC performance from –40°C to +105°C. These low-power optocouplers are suitable for high-speed logic interface applications.

CAUTION! It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. The components featured in this data sheet are not to be used in military or aerospace applications or environments.

Hot Tags: acpl-064l-500e, China acpl-064l-500e manufacturers, suppliers, 6N137-500E, ACPL-021L-500E, Photo Coupler Logic Gate, ACNW261L-500E, ACNT-H61L-500E, ACNT-H61LC-500E