
ACNW261L-500E
Description
Technical Parameters
The ACNW261L-500E optocoupler logic gate is a highly versatile and efficient component, with key features including ultra-low current consumption, adaptable input current capabilities, multiple package options, built-in slew-rate controlled output, tri-state output with an enable pin, high common mode rejection, high-speed performance, and wide-temperature range operation. Moreover, its strong emphasis on safety is evident through its UL 1577 recognition, CSA approval, and compliance with IEC/EN/DIN EN 60747-5-5 standards. This optocoupler is an excellent choice for modern electronic applications, offering reliability and performance while minimizing power consumption.

Related Products:
|
Mfr Part |
ACNW261L-000E |
ACNW261L-300E |
ACNW261L-500E |
|
Description |
OPTOISO 5KV TRI-STATE 8DIP |
OPTOISO 5KV TRI-STATE 8SMD |
OPTOISO 5KV TRI-STATE 8SMD |
|
Stock |
40000 |
40000 |
40000 |
|
Product Status |
Active |
Active |
Active |
|
Number of Channels |
1 |
1 |
1 |
|
Voltage-Isolation |
5000Vrms |
5000Vrms |
5000Vrms |
|
Common Mode Transient Immunity (Min) |
20kV/μs |
20kV/μs |
20kV/μs |
|
Input Type |
DC |
DC |
DC |
|
Output Type |
Totem Pole |
Totem Pole |
Totem Pole |
|
Current - Output / Channel |
10mA |
10mA |
10mA |
|
Data Rate |
10MBd |
10MBd |
10MBd |
|
Propagation Delay tpLH / tpHL (Max) |
95ns,95ns |
95ns,95ns |
95ns,95ns |
|
Voltage - Forward (Vf) (Typ) |
1.5V |
1.5V |
1.5V |
|
Current - DC Forward (If) (Max) |
8mA |
8mA |
8mA |
|
Voltage - Supply |
2.7 V ~ 5.5 V |
2.7 V ~ 5.5 V |
2.7 V ~ 5.5 V |
|
Operating Temperature |
-40°C ~ 105°C |
-40°C ~ 105°C |
-40°C ~ 105°C |
|
Package / Case |
DIP8(9.0mm) |
SMD8(9.0mm) |
SMD8(9.0mm) |
|
Package |
Tube |
Tape & Reel (TR) |
Tape & Reel (TR) |
Applications:
• Communication Interface: RS485, CANBus, I2C
• Microprocessor System Interfaces
• Digital isolation for A/D, D/A conversion
Description:
The ACPL-061L/ACPL-C61L/ACNW261L is an optically coupled optocoupler that combines an AlGaAs light emitting diode and an integrated high gain photo detector addresses the low power need. The optocoupler consumes extremely low power, at maximum 1.5 mA IDD per channel across temperature. The forward current is as low as 1.6 mA to 4 mA and allows direct current drive by most microprocessors.
These optocouplers support both 3.3 V and 5 V supply voltage with guaranteed AC and DC operational parameters from temperature range -40° C to +105° C. The output of the detector IC is a CMOS output. An enable input allows the detector output to be strobed. The internal Faraday shield provides a guaranteed common mode transient immunity specification of 20 kV/μs.
The CMOS output is slew-rate controlled and is designed to allow the rise time and fall time to be controlled over a wide range of the load capacitance.
This unique design provides maximum AC and DC circuit isolation while achieving TTL/CMOS compatibility. These optocouplers are suitable for high speed logic interfacing, while consuming extremely low power.
Hot Tags: acnw261l-500e, China acnw261l-500e manufacturers, suppliers, 6N137-500E, ACNT-H61L-500E, ACNT-H61LC-500E, ACPL-021L-500E, ACNW261L-500E, Photo Coupler Logic Gate
Previous
ACPL-021L-500ENext
ACNT-H61LC-500ESend Inquiry
You Might Also Like







