The difference between solid state relay and ordinary relay

Jul 20, 2023

Leave a message

1. Structure. Ordinary relays work by using the suction effect generated by the circuit in the input circuit between the ordinary iron core and the armature; solid state relays use electronic components to perform their functions, no mechanical moving components are required, and the input and output are isolated.

2. Working mode. Ordinary relays use the principle of ordinary induction to control the on-off of the circuit through the power of ordinary iron. Therefore, when the coil is connected with DC, the contacts can communicate with AC and DC; solid state relays rely on electrical, magnetic and optical properties to complete their isolation and relay switching functions. Therefore, it is divided into DC input-AC output type, DC input-branch output type, AC input-AC output type and AC input-DC output type.

3. Working status. Ordinary relays use the suction effect created between the armatures to switch circuits on and off. Therefore, the action response is slow, there is noise, and the life is limited; the solid state relay responds quickly, runs without noise, and has a long service life.

4. Use environment. Under the influence of factors such as temperature, humidity, atmospheric pressure, sand pollution, chemical gas, and general interference, ordinary relays are generally inferior to solid-state relays.

Send Inquiry