
ISO1540DR
Description
Technical Parameters
ISO1540DR is an excellent isolated interface IC designed for bidirectional I2C communication, providing excellent performance and reliability. It supports operating frequencies up to 1 MHz, is suitable for a variety of voltage conditions, has strong output capabilities, and operates over a wide temperature range. In addition, ISO1540DR has excellent interference immunity and ESD protection and meets multiple safety certification standards, including high isolation capability and basic insulation requirements.

Related Products:
|
Mfr Part |
ISO1540D |
ISO1540DR |
ISO1540QDQ1 |
ISO1540QDRQ1 |
|
Description |
Isolated interface ICs |
Isolated interface ICs |
Isolated interface ICs |
Isolated interface ICs |
|
Stock |
30000 |
30000 |
30000 |
30000 |
|
Product Status |
Active |
Active |
Active |
Active |
|
Technology |
Capacitive Coupling |
Capacitive Coupling |
Capacitive Coupling |
Capacitive Coupling |
|
Type |
I2C Isolator |
I2C Isolator |
I2C Isolator |
I2C Isolator |
|
Isolated Power |
No |
No |
No |
No |
|
Number of Channels |
2 |
2 |
2 |
2 |
|
Inputs - Side 1/Side 2 |
2/2 |
2/2 |
2/2 |
2/2 |
|
Channel Type |
Bidirectional |
Bidirectional |
Bidirectional |
Bidirectional |
|
Voltage-Isolation |
2.5kVrms |
2.5kVrms |
2.5kVrms |
2.5kVrms |
|
Common Mode Transient Immunity (Min) |
25kV/µs |
25kV/µs |
25kV/µs |
25kV/µs |
|
Data Rate |
1Mbps |
1Mbps |
1Mbps |
1Mbps |
|
Pulse Width Distortion (Max) |
80ns,21ns |
80ns,21ns |
80ns,21ns |
80ns,21ns |
|
Rise / Fall Time (Typ) |
- |
- |
- |
- |
|
Voltage - Supply |
3 V ~ 5.5 V |
3 V ~ 5.5 V |
3 V ~ 5.5 V |
3 V ~ 5.5 V |
|
Operating Temperature |
-40°C ~ 125°C |
-40°C ~ 125°C |
-40°C ~ 125°C |
-40°C ~ 125°C |
|
Package / Case |
SOP8 |
SOP8 |
SOP8 |
SOP8 |
|
Package |
Tape & Reel (TR) |
Tape & Reel (TR) |
Tape & Reel (TR) |
Tape & Reel (TR) |
Applications:
·Isolated I2C buses
·SMBus and PMBus interfaces
·Open-drain networks
·Motor control systems
·Battery management
·I 2C level shifting
Description:
The ISO1540 and ISO1541 devices are low-power, bidirectional isolators that are compatible with I2C interfaces. These devices have logic input and output buffers that are separated by Texas Instruments Capacitive Isolation technology using a silicon dioxide (SiO2) barrier. When used with isolated power supplies, these devices block high voltages, isolate grounds, and prevent noise currents from entering the local ground and interfering with or damaging sensitive circuitry.
This isolation technology provides for function, performance, size, and power consumption advantages when compared to optocouplers. The ISO1540 and ISO1541 devices enable a complete isolated I2C interface to be implemented within a small form factor.
The ISO1540 has two isolated bidirectional channels for clock and data lines while the ISO1541 has a bidirectional data and a unidirectional clock channel. The ISO1541 is useful in applications that have a single controller while the ISO1540 is suitable for multi-controller applications. For applications where clock stretching by the target is possible, the ISO1540 device should be used.
Isolated bidirectional communication is accomplished within these devices by offsetting the low-level output voltage on side 1 to a value greater than the highlevel input voltage on side 1, thus preventing an internal logic latch that otherwise would occur with standard digital isolators.
Hot Tags: iso1540dr, China iso1540dr manufacturers, suppliers, ISO1641DWR, IL3085E, ISO35MDWR, MAX14880AWE T, ISO1540DR, ISO1044BDR
Previous
ISO1541DRNext
ISO1452DWRSend Inquiry
You Might Also Like







