ACNW3130-500E

The ACNW3130-500E optocoupler gate driver is a high-performance device designed for demanding industrial applications. It offers high-speed response, exceptional Common Mode Rejection (CMR), and power-efficient operation. With safety certifications including UL Recognition, CSA Approval, and IEC/EN/DIN EN 60747-5-5 approval, it can withstand high voltage levels. Its specifications, such as a 2.5 A maximum peak output current, low-level output voltage of 0.5 V, and a wide operating voltage range from 15 to 30 Volts, make it versatile for various applications. Additionally, it operates reliably in industrial temperature ranges from -40°C to 100°C. The ACNW3130-500E is a top choice for applications where speed, safety, and efficiency are critical, offering robust performance and reliable signal isolation.

• IGBT/MOSFET gate drive

• AC/Brushless DC motor drives

• Industrial inverters

• Switching Power Supplies (SPS)

• 2.5 A maximum peak output current.

• 2.0 A minimum peak output current.

• 40 kV/µs minimum Common Mode Rejection (CMR) at VCM = 1500 V

• 0.5 V maximum low level output voltage (VOL) eliminates need for negative gate drive

• ICC = 5 mA maximum supply current

• Under Voltage Lock-Out protection (UVLO) with hysteresis

• Wide operating VCC range: 15 to 30 Volts

• 500 ns maximum switching speeds

• Industrial temperature range: -40°C to 100°C

The ACPL-3130 contains a GaAsP LED while the ACPL-J313 and the ANCW3130 contain an AlGaAs LED. The LED is optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices. The voltage and current supplied by these optocouplers make them ideally suited for directly driving IGBTs with ratings up to 1200 V/100 A. For IGBTs with higher ratings, the ACPL-3130 series can be used to drive a discrete power stage which drives the IGBT gate. The ANCW3130 has the highest insulation voltage of VIORM = 1414 Vpeak in the IEC/EN/DIN EN 60747-5-5. The ACPL-J313 has an insulation voltage of VIORM = 1230 Vpeak and the VIORM = 630 Vpeak is also available with the ACPL3130 (Option 060).

CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.

Hot Tags: acnw3130-500e, China acnw3130-500e manufacturers, suppliers