
ADM4852AR
Description
Technical Parameters
The ADM4852AR RS-485 transceiver, compliant with Electronics Industries Alliance (EIA) standards, offers a versatile solution for data communication in diverse industrial and automotive applications. With a maximum data rate of 2.5 Mbps, support for both half-duplex and full-duplex modes, and reduced slew rates for low electromagnetic interference (EMI), it ensures reliable and efficient communication. Noteworthy features include true fail-safe receiver inputs, low power consumption in shutdown mode, scalability for up to 256 devices on a single bus, and high-Z output when disabled. The transceiver's wide bus common-mode range (-7 V to +12 V), thermal shutdown, and short-circuit protection enhance its adaptability and durability. Pin compatibility with the MAX308x series and qualification for automotive applications further solidify the ADM4852AR as a robust choice for creating scalable and reliable communication networks.

Related Products:
|
Mfr Part |
ADM4852AR |
ADM4852ARZ |
ADM4852ARZ-REEL7 |
|
Description |
IC TRANSCEIVER RS485_422 |
IC TRANSCEIVER RS485_422 |
IC TRANSCEIVER RS485_422 |
|
Stock |
40000 |
40000 |
40000 |
|
Product Status |
Active |
Active |
Active |
|
Type |
Transceiver |
Transceiver |
Transceiver |
|
Protocol |
RS422, RS485 |
RS422, RS485 |
RS422, RS485 |
|
Number of Drivers/Receivers |
1/1. |
1/1. |
1/1. |
|
Duplex |
Half |
Half |
Half |
|
Receiver Hysteresis |
20 mV |
20 mV |
20 mV |
|
Data Rate |
2.5Mbps |
2.5Mbps |
2.5Mbps |
|
Voltage - Supply |
4.75V ~ 5.25V |
4.75V ~ 5.25V |
4.75V ~ 5.25V |
|
Operating Temperature |
-40°C ~ 85°C |
-40°C ~ 85°C |
-40°C ~ 85°C |
|
Package / Case |
SOP8(3.9x1.27) |
SOP8(3.9x1.27) |
SOP8(3.9x1.27) |
|
Package |
Tape & Reel (TR) |
Tape & Reel (TR) |
Tape & Reel (TR) |
APPLICATIONS:
·Low power RS-485 applications
·EMI sensitive systems
·DTE to DCE interfaces
·Industrial control
·Packet switching
·Local area networks
·Level translators
GENERAL DESCRIPTION:
The ADM4850/ADM4851/ADM4852/ADM4853/ADM4854/ ADM4855/ADM4856/ADM4857 are differential line transceivers suitable for high speed, half-duplex and full duplex data communication on multipoint bus transmission lines. They are designed for balanced data transmission and comply with EIA Standards RS-485 and RS-422. The ADM4850/ADM4851/ ADM4852/ADM4853 are half-duplex transceivers that share differential lines and have separate enable inputs for the driver and receiver. The full duplex ADM4854/ADM4855/ADM4856/ ADM4857 transceivers have dedicated differential line driver outputs and receiver inputs.
The devices have a 1/8-unit load receiver input impedance, which allows up to 256 transceivers on one bus. Because only one driver must be enabled at any time, the output of a disabled or powered down driver is three-stated to avoid overloading the bus. The receiver inputs have a true fail-safe feature, which ensures a logic high output level when the inputs are open or shorted.
Hot Tags: adm4852ar, China adm4852ar manufacturers, suppliers, ADM1485JR, ADM1487EARZ-REEL7, RS 485 Transceivers, ADM3061EAR, Ic, ADM1485AR
Send Inquiry
You Might Also Like







