MAX14432FASE+T

MAX14432FASE+T

Related Products: Applications: ● Isolated SPI Interface ● Fieldbus Communications for Industrial Automation ● Isolated RS-485/RS-422, CAN ● Battery Management ● Medical Systems General Description: The MAX14430/MAX14431/MAX14432 are fast, low power, 4-channel, digital galvanic isolators using...
Send Inquiry
Add To Inquiry

Description

Technical Parameters

Related Products:

 

Mfr Part

MAX14432FASE+T

Description

Digital Isolator

Stock

30000

Product Status

Active

Technology

Capacitive Coupling

Type

General Purpose

Voltage-Isolation

3.75kVrms

Data Rate

200Mbps

Isolated Power

No

Number of Channels

4

Inputs - Side 1/Side 2

2/2

Channel Type

Unidirectional

Common Mode Transient Immunity (Min)

50kV/us

Propagation Delay tpLH & tpHL (Max)

9.4ns,9.2ns

Pulse Width Distortion (Max)

2ns

Rise / Fall Time (Typ)

1.6ns, 1.4ns (Max)

Voltage - Supply

1.71V ~ 5.5V

Operating Temperature

-40°C ~ 125°C

Package / Case

SOP16(3.9x1.27)7.0

Package

Tape & Reel (TR)

 

Applications:

 

● Isolated SPI Interface

● Fieldbus Communications for Industrial Automation

● Isolated RS-485/RS-422, CAN

● Battery Management

● Medical Systems

 

General Description:

 

The MAX14430/MAX14431/MAX14432 are fast, low power, 4-channel, digital galvanic isolators using Maxim's proprietary process technology. These devices transfer digital signals between circuits with different power domains while using as little as 0.58mW per channel at 1Mbps with a 1.8V supply. The MAX14430–MAX14432 have an isolation rating of 3kVRMS (QSOP package) or 3.75kVRMS (narrow SOIC package) for 60 seconds. For applications requiring 5kVRMS of isolation, see the MAX14434- MAX14436.

 

The MAX14430–MAX14432 family offers all three possible unidirectional channel configurations to accommodate any 4-channel design, including SPI, RS-232, RS-485, and digital I/O applications. Output enable for the A side of the MAX14431R/S/U/V is active-low, making them ideal for isolating a port on a shared SPI bus since the CS signal can directly enable the MISO signal on the isolator. All other devices in the family have the traditional active-high enable.

 

Devices are available with a maximum data rate of either 25Mbps or 200Mbps and with outputs that are either default-high or default-low. The default is the state the output assumes when the input is either not powered or is open-circuit. See the Ordering Information and Product Selector Guide for suffixes associated with each option. Independent 1.71V to 5.5V supplies on each side of the isolator also make the devices suitable for use as level translators.

 

The MAX14430–MAX14432 are available either in a 16-pin narrow-body SOIC package with 4mm of creepage and clearance, or in a smaller 16-pin QSOP package with 4mm of creepage and clearance. The SOIC package material has a minimum comparative tracking index (CTI) of 600, which gives it a group I rating in creepage table. The QSOP package material has a minimum CTI of 400, which gives it a group II rating in creepage table. All devices are rated for operation at ambient temperatures of -40°C to +125°C.

Hot Tags: max14432fase+t, China max14432fase+t manufacturers, suppliers, ADUM120N1WBRZ-RL7, ADUM142D0BRWZ-RL, ADUM1447ARQZ-RL7, ADUM1245ARZ-RL7, ADUM131E1BRWZ-RL, ACML-7420-500E

Send Inquiry