
AMC1301SDWVR
Description
Technical Parameters
The AMC1301SDWVR isolation amplifier provides a wide input voltage range of ±250mV and is optimized for accurate current measurements using shunt resistors. Its fixed gain of 8.2 V/V simplifies system design while maintaining accuracy. It has minimal DC error, and offset error, offset drift, gain error, gain drift and nonlinearity are all within acceptable limits. Both sides run at 3.3V, ensuring efficient power usage. Additionally, it features system-level diagnostics and has strong safety certifications, making it a reliable choice for safety-critical applications.

Related Products:
|
Mfr Part |
AMC1301SDWV |
AMC1301SDWVR |
|
Description |
IC OPAMP ISOLATION 1 CIRC 8SOIC |
IC OPAMP ISOLATION 1 CIRC 8SOIC |
|
Product Status |
Active |
Active |
|
Technology |
Isolator AMP Anaogl |
Isolator AMP Anaogl |
|
Voltage-Isolation |
5kVrms |
5kVrms |
|
Specified Input Range |
±250mV |
±250mV |
|
Small-signal bandwidth |
190 kHz |
190 kHz |
|
Gain error |
±0.3% |
±0.3% |
|
Nominal gain |
8.2 |
8.2 |
|
CMTI |
15kV/µs |
15kV/µs |
|
supply voltage |
4.5V ~ 5.5V |
4.5V ~ 5.5V |
|
Operating Temperature |
-55°C ~ 125°C |
-55°C ~ 125°C |
|
Package / Case |
WSOP8 |
WSOP8 |
Applications:
• Shunt-resistor-based current sensing in:
– Motor drives
– Frequency inverters
– Uninterruptible power supplies
Description:
The AMC1301 is a precision, isolated amplifier with an output separated from the input circuitry by an isolation barrier that is highly resistant to magnetic interference. This barrier is certified to provide reinforced isolation of up to 7070 VPEAK according to the DIN EN IEC 60747-17 (VDE 0884-17) and UL1577 standards, and supports a working voltage up to 1 k VRMS.
The isolation barrier separates parts of the system that operate on different common-mode voltage levels and protects the low-side from voltage levels that can cause electrical damage and are potentially harmful to an operator.
The input of the AMC1301 is optimized for direct connection to shunt resistors or other low voltage-level signal sources. The excellent DC accuracy and low temperature drift supports accurate current control in onboard chargers (OBC), DC/DC converters, frequency inverters, or other high voltage applications. The integrated common-mode over voltage and missing high-side supply voltage detection features of the AMC1301 simplify system level design and diagnostics.
The AMC1301 is fully specified over the extended industrial temperature range of –40°C to +125°C and is available in a wide-body 8-pin SOIC (DWV) package. The AMC1301S is specified over the temperature range of –55°C to +125°C.
Hot Tags: amc1301sdwvr, China amc1301sdwvr manufacturers, suppliers, Isolated Amplifiers, AMC1100DWVR, AMC1200BDUBR, AMC1200BDWVR, AMC1300BQDWVRQ1, AMC1100DUBR
Previous
SI8920AC-IPRNext
AMC1301QDWVRQ1Send Inquiry
You Might Also Like







